Scenes; Scene Basics - Universal Devices ISY-994i User Manual

Send notification if either Zone 1,2, or 3 is violated while the Lobby is Armed Fully
If
Elk Area 'Lobby' 'Arm Up State' is Armed Fully
And (
)
Then
Send Notification to 'me' content 'Zone Status'
Else
- No Actions - (To add one, press 'Action')
Variables for Notifications/ELK, see 8.4.5 Elk Variables

7 Scenes

7.1 Scene Basics

Scenes are collections of INSTEON devices that react to and with one another in various
ways. Scenes are comprised of both Responders and Controllers.
For additional information on creating and working with scenes, see section: 7 Scenes
Responders are devices contained within scenes that only respond to commands issued to
the scene. For example, a lamp module with a table lamp attached would likely be a
Responder to the scene. When the scene is turned on, the lamp module would turn on.
When the scene is turned off, the map module would turn off. Responders are colored blue
within a scene.
Controllers not only respond to commands issued to the scene, they also control the scene.
An example of a Controller might be a button located on a Keypad – when that Keypad
button is pressed, all members of the scene will respond as configured. Controllers are
colored red within a scene.
Elk Zone 'Zone 001' is Violated
Or Elk Zone 'Zone 002' is Violated
Or Elk Zone 'Zone 003' is Violated
Page | 99