14.2.1
Program: Motion Detect
If
X10 'M1/On (3)' is Received
Then
Run Program 'Motion Turn On' (If)
Wait 3 minutes
Set 'Hall Light' Off
Else
- No Actions - (To add one, press 'Action')
14.2.2
Program: Motion Turn On
If
Status 'Hall Light' is Off
Then
Set 'Hall Light' On
Else
- No Actions - (To add one, press 'Action')
Each time motion is detected, program Motion Detect is restarted, retriggering the timer
and calling program Motion Turn On. The latter program turns on the light, but only if it is
off.
Page | 400