Program Actions - Universal Devices ISY-994i User Manual

ELK conditions trigger programs based on the state of available ELK resources, assuming
you have an ELK security system installed and communicating with your ISY, and have the
optional ELK Security System module installed. See 6.11 ELK Integration Module for
more information.

9.3.9 Program Actions

In the Add To Program button section, click Action to add an Action to your Program.
Program Actions are commands that are run when the IF statement is true (a THEN action)
or if the IF statement is no longer true (an ELSE action). When adding an Action to your
program, be sure to click the Add to 'Then' or Add to 'Else' button depending on your
intended result.
Insteon (Insteon/X10 with the optional X10 option): Sends INSTEON commands to
devices or scenes to turn them ON, OFF, etc. Not all options are available for all devices:
ON (send a standard ON command)
OFF (send a standard OFF command)
FAST ON (turn device full on ignoring programmed on level or ramp rate)
FAST OFF (turn device full off ignoring programmed ramp rate)
FADE UP (start the ramp up of a dimmable device
FADE DOWN (start the ramp down of a dimmable device)
FADE TOP (stop the ramping up or down of a dimmable device)
BRIGHT (small increase in brightness of a dimmable device)
DIM (small decrease in brightness of a dimmable device)
QUERY (query the current state of a device)
BEEP DURATION (causes a supported device or scene to emit a beep)
BACKLIGHT LEVEL (sets the backlight level on a supported device)
Send X10: Sends X10 commands to X10-compatible devices. Using this feature, ISY
programs can control a wide range of X10-compatible devices.
Page | 170