Example Isy Programs; Calendar Date Programs; Generic Calendar Using Programs And Variables; The Basic Idea Of This Series Of Programs - Universal Devices ISY-994i User Manual

• Preset Dim (12) - Preset dimmer levels 52% to 100%. See level chart below for
corresponding letter code for the desired dim level.
• All Units Off (13)
• Hail Request (14)
• Dim (15)
• Extended Data (16)

11 Example ISY Programs

11.1 Calendar Date Programs

11.1.1

Generic Calendar Using Programs and Variables

11.1.1.1The Basic Idea of this Series of Programs

ISY's date function is a bit limited. As the firmware currently supports, there is no direct
way to use it for recurring events except related to day of the week. For example, you can
have something happen every Monday, or every Monday and Tuesday, but you can't set up
something to run on the third Tuesday of every month, or every 3 rd day, or on even days
of the month, or every July 4th, I think you get the idea.
Working outside the built-in firmware, a series of programs using the variable function can
solve this problem. The following series of programs starts off with a single program that
triggers at midnight and then cascades through a series of additional programs using "run
if", "run then", and "run else" commands. These programs update a set of variables each day
31 (Universal Devices)
Figure 187: X-10 Commands Included in ISY
31
Page | 221