Add Devices To A Scene - Universal Devices ISY-994i User Manual

7.2.3 Add Devices to a Scene

Here are some useful terms from the glossary that pertain to adding devices a scene. A
controller is a transmitting device that sends out a message to cause an action in a
receiving device. A
from a transmitting device.
• Control+ Click all the devices you want to add to your new scene, and drag and drop
the selected devices on to the new scene
• Confirm the scene to be created
o If there are any devices that can be a controller the window will wait for you
to set any
o If there are not any devices that can be a
automatically start creating the scene
You will see the busy window popup with progress. It may disappear and re-popup several
times this is ok. Be patient it may take some time to create your new scene. The more
devices the more it has to do. It is creating all the links for your scene. These links are local
to each device and will function with or without the ISY when it's done.
responder is a receiving device that takes action based on a message
controller devices, click ok when done
Figure 106: New Scene Devices to Add
controller the window will
Page | 107