Appliancelinc - Universal Devices ISY-994i User Manual

There are options on the Administrative Console File menu for the PLM.
• Restore|Replace Modem
• Remove Modem

13.2 ApplianceLinc

Current ApplianceLincs will not act as Controllers – they will not notify the ISY or control
other linked devices if turned on or off locally (via the SET button or using load sensing).
13.3 ControLinc
13.3.1 Link a ControLinc - 2340
Choose this menu to link a ControLinc.
• The Insteon address is on the back of the ControLinc, usually under the table-top
stand.
Enter the Insteon address in the requester. Then click on the "Ok" button.
Note: You cannot discover or find other devices linked to the ControLinc using this option.
13.4 EZI/O Devices (SimpleHomeNet)
Due to variations in firmware on SimpleHomeNet devices, some units (especially older
firmware) may not work well with the ISY. Symptoms include the ISY not being notified of
sensor state changes.
54 (Universal Devices)
54
Figure 211: Link a ControLinc Dialog
Page | 361