Program #15 - Main Bath Door Status Closed Fan On Timer – Enabled - Universal Devices ISY-994i User Manual

Here, each time the door status changes, the re-trigger program (program 9) is called. If the
motion status is On, or the enable flag is False, the timer will be stopped. Otherwise, the
timer program (program 13) will be called again, will reevaluate the door status, and
initiate the appropriate time interval.
Another feature we could add is to have the fan turn on if the door is closed and the light is
on:
11.8.1.15Program #15 - Main Bath Door Status Closed Fan On Timer – Enabled
If
Program 'Main Bath Door Status Closed' is True
And Status 'Main Bath Lights' is not Off
Then
Wait 5 minutes
Set 'Main Bath Fan' On
Else
- No Actions - (To add one, press 'Action')
If you wish to have the fan turn on immediately, simply remove the Wait.
Finally, as with any INSTEON motion sensor application, we can take note of a low battery
indication:
11.8.1.16Program #16 - Main Bath Door Motion Low Battery – Enabled
If
Status 'Main Bath Motion.3-LowBattery' is On
Then
Repeat Every 24 hours
Send Notification to All
Else
- No Actions - (To add one, press 'Action')
Page | 310