11.3 Garage Door Programs
11.3.1
Garage Door Notification Program
I use a few programs. One to do each job. My control is not connected but lines could be
inserted very easily.
Here is the 4 hour allowance for a garage door left open calling the one below.
11.3.1.1Program: Garage Door Open.carHome
If
'Garage / Garage Door.closed' Status is Off
And $sTag1.outOfRange is $cFALSE
Then
Wait 4 hours
Run Program 'Garage Door Open.carGone' (Then Path)
Else
- No Actions - (To add one, press 'Action')
34
(posted by: larryllix)
34
Page | 258