Climate Module - Universal Devices ISY-994i User Manual

Please note the following limitations:
This module uses simulated INSTEON addresses internally. Though unlikely, it could
potentially conflict with existing INSTEON devices in your ISY, stopping you from using
those particular INSTEON modules.
This module only allows for ON/OFF commands in the device tree. No support for
bright/dim.
Note that X10 devices cannot be added to INSTEON Scenes.
To add an A10/X10 device to your tree, click the Link Management pull-down menu and
choose New INSTEON/A10/X10 Device.
Type the A10/X10 device's address, name the device, then choose the appropriate device
type:
Figure 70: Adding an X10 Device
Once added the A10/X10 device appears in your Admin Console's device tree and can be
organized or used in ISY Programs just like any other INSTEON device.

6.5 Climate Module

Using the Climate Module, you can create ISY Programs using local weather information as
conditions. This module gathers information from HAM Weather, which provides a huge
number of weather stations to pull data from.
To view and configure your Climate Module, click the Configuration tab in the ISY's
Administrative Console then the Climate sub-tab. To choose your local weather station,
click the FIND button and type your local City name. Double-click your Area to see a list of
weather stations within your area.
Page | 73