Cl – Configure Maximum Log Size - Universal Devices ISY-994i User Manual

23.5.2 CL – Configure Maximum Log Size
To change the amount of log space allowed, type CL at the shell prompt.
• Default = 3 MB
• Range = 1-16 MB
23.5.3 CME - Configure Maximum Emails per minute
• Default = 60
• Range 1-3600
23.5.4 CR - Max Device Command Retries
• Default = 2
• Range 1-16
23.5.5 CT – Configure TCP/IP
TCP/IP configuration command enables you to either assign static IP address information
or instruct the ISY to use DHCP. The default is DHCP. To perform TCP/IP configuration,
type CT at the shell prompt.
Assigning a Static IP Address
• When prompted for IP Address, enter the desired static IP address
• When prompted for NetMask, enter the desired subnet mask
• When prompted for Gateway, enter the IP address for the gateway
• When prompted for DNS Server, enter the IP address for the DNS server
When prompted with Save Changes, enter Y. The system will reboot using the provided
information for TCP/IP configuration. Note: If you enter the wrong Gateway and/or DNS
server, some of the notifications and time functions will become inoperable.
23.5.6 Requesting a DHCP Assigned IP Address
• When prompted for IP Address, enter 0.0.0.0
• When prompted for NetMask, ignore
• When prompted for Gateway, ignore
• When prompted for DNS Server, ignore
When prompted with Save Changes, enter Y. The system will reboot and attempt to get
DHCP assigned TCP/IP information upon system start.
Page | 599