9.8.2.9Program: Run 60 Min
If
- No Conditions - (To add one, press 'Schedule' or 'Condition')
Then
Run Program 'Flag 1' (Then Path)
Run Program 'Flag 2' (Then Path)
Wait 30 minutes
Run Program 'Run 30 min' (Then Path)
Else
- No Actions - (To add one, press 'Action')
9.8.2.10Program: Run 90 Min
If
- No Conditions - (To add one, press 'Schedule' or 'Condition')
Then
Run Program 'Flag 1' (Then Path)
Run Program 'Flag 2' (Then Path)
Wait 30 minutes
Run Program 'Run 60 min' (Then Path)
Else
- No Actions - (To add one, press 'Action')
Lastly, I have the program that turns the fan off. This will terminate any timer if the switch
is turned off locally or will turn off at end of timer countdown.
Page | 202