Program Conditions - Universal Devices ISY-994i User Manual

9.3.8 Program Conditions

In the Add To Program button section, click Condition to add a Condition to your
Program.
Conditions add other criteria to your IF statement. When adding a Condition to your
Program, be sure to choose if you would like it to be added as an AND or OR.
Types of Conditions are:
Status conditions are true if a selected INSTEON device is at the state you specify. You can
check to see if a device is On, Off, is Not On, is Not Off; if a dimmable device is at a specific
level, if it's greater than a specific level, etc.
On means a device is at 100% brightness. So, if your program is checking to see if a
dimmable device is on at ANY level, select Not Off instead.
For example, to see if your light is at 100% brightness you could do the following:
Figure 174: Status Condition – 100% Bright
But, to see if the same light is on at ANY brightness you might do this instead:
Figure 175: Status Condition – Any Brightness
Control conditions trigger only if a specified switch is pressed. The following types of
conditions are available (not all options are available for all devices):
On
Off
Page | 168