Install The Latest Firmware - Universal Devices ISY-994i User Manual

o Please note: the ISY works with both FAT 16/32, but FS function formats it
specifically for use with ISY with some performance improvements so its
preferred you use this method.
• You will see the Goodbye prompt confirming that the format is complete and that
the has ISY rebooted

23.15.3 Install the latest firmware

• Download the latest firmware which can be found from the Current Release and
Betas section of the Forum.
• Go to
http://isy.universal-devices.com/994i/admin.jnlp
o Please note: using the UDI link supplies the admin code to launch your ISY in
its clean state, trying to connect with any other methods will not work until
you have reinstalled the latest firmware
• Login with the admin password
• Choose Help | Manually Upgrade My Lighting
• Choose the latest firmware (or beta if you wish) from the location you have
downloaded it to
• The ISY will reboot after the install is complete
23.15.4 Restore your latest good backup
• Login with the admin password
• Choose File | Restore ISY
• Choose your latest good backup
o Please note: If your performing this whole process because of a corrupted SD
card, a good backup is considered one that was completed successfully
before the SD card got corrupted
• The ISY will reboot after the restore is complete
23.15.5 Check that all is well
• Login with your password
• Devices and programs should be restored and back to normal.
23.16 Update the ISY Firmware
The ISY unit comes with the capability (firmware 2.6 or greater) to automatically update
your firmware. You no longer need a special username and password to automatically
122 (Universal Devices)
122
to launch the ISY
Page | 635