Program Main Bath Door Status Change – Enabled - Universal Devices ISY-994i User Manual

Putting it all together, a complete program group (contained within a f_Main Bath
Door/Motion folder for organizational purposes) may look like this:
11.8.1.17Program Main Bath Door Status Change – Enabled
If
Control 'Main Bath Contact.1' is switched Off
And Control 'Main Bath Contact.1' is not switched On
Then
Run Program 'Main Bath Door Status Closed' (Then Path)
Run Program 'Main Bath Motion Re-Trigger' (If)
Else
Run Program 'Main Bath Door Status Closed' (Else Path)
Run Program 'Main Bath Motion Re-Trigger' (If)
11.8.1.18Program Main Bath Door Status Closed – NOT Enabled
If
- No Conditions - (To add one, press 'Schedule' or 'Condition')
Then
Set Program 'Main Bath Door Status Closed' To Run At Startup
Else
Set Program 'Main Bath Door Status Closed' To Not Run At Startup
Page | 311