Geo Fencing - Universal Devices ISY-994i User Manual

• Other settings may work - this is just what works for me - and it's a security best
practice now to avoid SSL3.
• Before 4.3.1 - a separate network resource needs to be created for each potential
action. So - one for 'Light On' and another for 'Light Off'. This makes it difficult to
send, for instance, the current temperature. 4.3.1 introduced substations in network
resources, with a couple of restrictions. You cannot use # to refer to the triggering
device, and he network resource must NOT be 'URL Encoded'.
18.8.2

Geo Fencing

If you have used Geo Fencing using MobiLinc, you do need to migrate it either to IFTTT,
Locative (IOS) or Tasker (Android):
• On your ISY, create a state variable that will be used to identify if you are Home or
Away
• On portal, for your ISY, go to Select Tools/Communication/IFTTT
• Click on Set Key, then Create Key. Close.
• Click Add Variable
o Choose the variable you just created
o Name it "Home"
o Set Value to 0
• Click Add Variable
o Choose the variable you just created
o Name it "Away"
o Set Value to 1
• Next to those 2 IFTTT events, click on the small blue arrow. This will give you the
URL to trigger each of those.
• Use an app to trigger those URLs based on location
o On IOS, Locative is a good choice
o On Android, Tasker is a good choice. For detailed configuration, please see
19.1 Tasker
18.9 Using Admin Console through ISY Portal
You can use ISY Portal for remote access through the Admin Console without the need for
any port forwarding. Here are the instructions:
18.9.1 Configure ISY Finder
• Go to your portal account, click on Select Tools (next to your ISY) and then choose
ISY Information
• Copy the URL next to Admin Console URL
94 (Universal Devices)
94
Page | 497