Refer to the KeypadLinc User's Manual Toggle Mode section for more information.
Note: Older Keypads must be set to Off or On at the KPL.
13.14.1.1.6Button Brightness
13.15
Leak Sensor
13.15.1 Linking a Leak Sensor - 2852
• Menu - Link Management/New INSTEON device
• Enter the address.
• Select the Leak Sensor from the drop-down list labeled "Device Type".
o Device Type = 10.08 (2852)
• Click Ok.
• Press and hold the set button on the Leak Sensor till the light starts blinking rapidly.
Once the light blinks rapidly, then quickly click and release the set button one more
time
o You have to be close (within 10 to 20 ft) of a dual band or RF device
• Click OK.
64
(Universal Devices)
Figure 229: Button Toggle Old
Figure 230: KeyPadLinc LED Brightness
64
Page | 377