All Aeotec Parameters - Universal Devices ISY-994i User Manual

15.8 All AeoTec Parameters

https://aeotec.freshdesk.com/support/solutions/folders/6000209471
15.9 AeoTec Siren Configuration Parameters
https://www.vesternet.com/mwdownloads/download/link/id/426/z_wave_aeon_labs_sir
en_engineering_specification.pdf
15.10 RemoTec ZXT-120 Configuration
ZXT-120 User Manual -
120xx_User_Manual.pdf
• To configure ZXT-120 for IR:
• Configure parameter 27 to set up code 0
o Configure parameter 25 and value from 0-22 to learn specific IR code data
from your original remote control
o After the IR code is learned, then go back to thermostat control page
o For the details, please refer to page 9-12 of user manual.
16 The Integrated IR Receiver Notes
If your ISY came equipped with an integrated IR receiver (model numbers that contain
"/IR"), Programs can be triggered using an RC5-compatible remote control. To program IR
codes into the ISY, click the Configuration tab, then the IR sub-tab.
The IR configuration page lists all IR codes currently recognized by the ISY. The first
column titled "Name" allows you to customize the name of a stored IR code. Simply double-
click the IR code you'd like to change and type the desired name. This is how the IR code
will be listed under ISY Program Conditions.
The "IR Code" is an internal number used to identify the IR code. It cannot be change and
for the most part should be ignored.
The "Status" column contains the last Condition received from a particular IR code. The
following conditions are available:
Pressed – indicates the remote-control button was pressed and released normally.
78 (Universal Devices)
- Manual
http://www.universal-devices.com/docs/ZXT-
78
Page | 423