Program #4 - Main Bath Motion Timer – Enabled - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

11.8.1.4Program #4 - Main Bath Motion Timer – Enabled

Status 'Main Bath Motion.1-Sensor' is Off

Wait 4 minutes

Set 'Main Bath Lights' Off

- No Actions - (To add one, press 'Action')

Here program 3 turns the lights on in response to motion, if they are not already on. When

the motion sensor stops sensing motion, times out, and sends the Off command, its status

becomes False and program 4 begins the countdown to turning the lights off. If during this

period motion is once again detected, the motion sensor sends another On command, the

sensor's status becomes True, and program 4 halts.

The motion sensor control of the lights may be programmatically enabled and disabled by

use of a flag:

11.8.1.5Program #5 - Main Bath Motion On – Enabled

Control 'Main Bath Motion.1-Sensor' is switched On

And Program 'Main Bath Motion Timer Enable' is True

And Status 'Main Bath Lights' is not On

Set Scene 'sMain Bath Lights' On

- No Actions - (To add one, press 'Action')

Troubleshooting