Programs -> Detail Tab - Universal Devices ISY-994i User Manual

Figure 52: ISY Toolbar
To perform an action on a program, simply selecting it by clicking on it, click the left-most
pull-down menu labeled "Choose" to select an action, and click the Apply button.
Available actions are:
Enable – enable a program that has been disabled
Disable – disable a program so that it will not run
Run (If) – force the evaluation of the IF statement and run the program
Run Then – force the run of the THEN portion of a program
Run Else – force the run of the ELSE portion of a program
Stop – stop a currently running program
Enable Run At Startup – set a program so that it automatically starts running when the
ISY reboots
Disable Run At Startup – set a program so that it will not automatically run when the ISY
reboots
On the right-most side of the tool bar is the Edit button which brings you to the Program
Details tab and allows you to edit the currently highlighted program. The Refresh button
forces a refresh of the screen.
5.3.2.2Programs -> Detail Tab
The Programs/Details tab is where you can create ISY Programs. ISY Programs are the
true power of the ISY, where you can extend the capabilities of INSTEON and other devices
using timers, triggers, macros, etc. Programs also allow you to utilize the ISY's optional IR
receiver, optional modules, and more.
To open this tab, first click the Programs tab, then click the Details sub-tab. The
Programs/Details screen is divided into several sections. The left-pane is used to show
your program hierarchy. As you create ISY programs and folders, they display here. The
Page | 52