Note: For more information on connecting to and using the ISY Shell, see 23.5 Advanced
Configuration Guide
23.5 Advanced Configuration Guide
Please refer to 21.1 Telnet to Your ISY to begin a Telnet or HyperTerminal session.
All commands are case sensitive and must be entered in upper case.
23.5.1
CI - Configure Infra-Red
To modify the settings for Infra-red use (only available on ISY-99i/IR)
• IR Hold detection [Default = 600 MilliSec](range 50-3000 MilliSec)
• IR Hold maintain [Default = 300 MilliSec](range 50-3000 MilliSec)
115
(Universal Devices)
Figure 398:HyperTerminal Menu
115
Page | 598