Decoding The Information - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

Figure 415: Event Viewer – Device communication events

In this image a device was turned Off and it sends a command to the ISY.

Device communications events adds to the information displayed by More Info. It adds

Group numbers, hop counts and debugging information.

In general, things work like this:

INSTEON Communications

• Sending a request from ISY (i1)

for Response)---->Receive INST-SRX. Timeout means that either INST-ACK or ISNT-

SRX did not come within allotted time (4 seconds).

• Sending a request from ISY (i2)

for Response)---->Receive INST-SRX---->Receive INST-ERX.

• Receiving events from devices

Decoding the Information

• Once the Event Viewer is begun during a session at the Administrative Console it

can be closed and will retain the information it has.

• Use the Clear button to start a new test.

• Set to a higher level the window will fill faster but will display more complete

• Set the Level to None when your test is done to stop scrolling the window.

• The Events can be saved Using the Save Log... button.

23.9 Event Viewer Log Details

Viewing the Log File:

From the ISY Administrative Console select the Tools/Log menu item. A window opens

asking if you wish to view the Log in Excel. Selecting Yes produces a file and opens Excel.

(Universal Devices)

---->Send Request---->Receive INST-ACK-(Wait

---->Receive INST-SRX