Optional: Factory Resetting Your Irlinc - Universal Devices ISY-994i User Manual

13.12.1.2Optional: Factory Resetting your IRLinc

If you remove all the links to the IRLinc from the ISY it should clean up everything, but just
in case you need to you can factory reset the IRLinc before linking it to the ISY.
• Unlink all the links in you ISY to the IRLinc
• Unplug the IRLinc, wait 10 seconds
• Press and continue to hold the Set button for 5 seconds while plugging the unit back
in, then release
o About 20 seconds after releasing the Set button, blue LED will flash twice to
indicate a successful reset
o Note: Blue LED may or may not be on during reset
13.13 IRLinc Transmitter
13.13.1 Add Button to IRLinc Transmitter – 2411T
62 (Universal Devices)
Figure 222: Add Button to IRLinc Transmitter
62
Page | 372