Sample Code:
If
X-10
10.5.11 IR 'node' arg
Description: The IR command listens for IR events.
Category
Condition
Sample Code:
If
IR
10.5.12 Set 'node' arg
Description: The 'Set' command sends INSTEON commands to the provided node. It also is
used for setting the Query table with the latest status of a node.
Category
Action
Sample Code:
Then
Set
'A1/On (3)' is Received
'Movie Time' is Pressed
'Bath Light' On
Arguments
Is, Is Not, Pressed, Double Pressed, Held,
Released
Arguments
On, Off, Fast On, Fast Off, Brighten, Dim,
Fade Up, Fade Down, Fade Stop, 1% - 99%,
Query
Page | 213