Change Port Via Isy Admin - Universal Devices ISY-994i User Manual

21.3.4.1Change Port via ISY Admin

ISY firmware v2.7.9+
Log into your ISY.
• Click on the Configuration tab, then System tab
• Under the Network Settings area change the HTTPS port, example 1443
• After selecting a new port click the Save button to save the changes, then your ISY
will reboot
• Optional reboot your router (Some routers may need reconfiguring if they don't pick
up the new IP address)
o Your remote access URL will be https://your.ext.ip.add:new_port
21.3.4.2Change Port via Telnet Interface
• Telnet To Your ISY
• Issue the CWP command: CWP - Configure Webserver Ports, see 23.5.7 CWP -
Configure Webserver Ports
• Change the HTTPS port to some other number, example 1443. This will reboot the
ISY
• Optional reboot your router (Some routers may need reconfiguring if they don't pick
up the new IP address)
o Your remote access URL will be https://your.ext.ip.add:new_port
Figure 369: Configure the Network Settings
Page | 545