I/Olinc - Universal Devices ISY-994i User Manual

▪ Select the Scene Controller button in the Off scene. This entry will be
13.11

I/OLinc

Several options are available when configuring an I/OLinc on the ISY. These include:
• Timeout (seconds) - Sets the length of time the relay will close when Momentary is
selected.
• Program Lock - Disables Set Button programming.
• Relay Follows Input - Sets Relay On when Sensor is On and Off when sensor if Off.
• Send X10 Send On (or Off) - Send X10 when the sensor changes.
• Trigger Off - If the TrigOff bit is set, Close Switch sends an OFF and Open Switch sends
an ON. If the TrigOff bit is clear, Close Switch sends an ON and Open Switch sends an
OFF.
• LED on TX - The LED flashes when the device sends INSTEON commands.
• Momentary: A - The relay will close momentary. If it is Linked while On it will respond
to On. If it is Linked while Off it will respond to Off.
• Momentary: Look at Sensor - If the sensor is On the relay will close momentarily when
an On command is received. If the sensor is Off the relay will close momentarily when
an Off command is received.
• Momentary: Both - On and Off both cause the relay to close momentary.
13.11.1 Linking an I/OLinc - 2450
Linking an I/OLinc is the same as for most other Insteon devices.
59 (Universal Devices)
• Fanlinc - Off
• All other buttons - 0
red.
• Click on Copy Scene Attributes from Off
59
Page | 366