Comment; Commands - Universal Devices ISY-994i User Manual

Sample Code:
Then
Repeat While

10.5.26 Comment

Description: The 'Comment' box creates a single note for the complete program. It is
shown below the program in the same Program Content window pane.
Category
Comment
Sample Code:
This is a comment for remembering some
details about a program.
10.6 X-10 Commands
These are the X-10 commands has been included into the ISY. They are utilized through
two different ISY program commands 'X-10' and 'Send X-10'.
• All Lights Off (1)
• Status=off (2)
• On (3)
• Preset Dim (4) - Preset dimmer levels 0% to 48%. See level chart below for
corresponding letter code for the desired dim level.
• All Lights On (5)
• Hail Acknowledge (6)
• Bright (7)
• Status=on (8)
• Extended Code (9)
• Status Request (10)
• Off (11)
$Int_1 > 0
$Int_1 -= 1
Wait 10 seconds
Arguments
na
Page | 220