Password/Usernames; Trouble Shooting; Launching The Administrative Console - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

4.4.1.14Password/Usernames:

• If the cameras don't support including the username and password in the later part

of the url (axis cameras for example), the web page will include it right after the

http:// as http://user:password unfortunately this isn't supported on all browsers

but it is the best that can be done.

I am getting a parsing error loading ...

• Please make sure you don't have any un-allowed special characters in the names.

• Also check browser cache by clearing it in browser settings, using another

browser/device or using private browsing.

A device or scene is missing:

• If you enabled local Caching on the settings page, please clear cache there.

• If not please check browser cache by clearing it in browser settings, using another

browser/device or using private browsing

The Administrative Console is where you will spend most of your time configuring and

tuning the ISY, programming your devices, etc.

The best way to launch the Admin Console is from the following URL (requires internet

http://isy.universal...com/994i/4.2.30

You can also install a copy of the Admin Console's applet on your local PC (icon created on

desktop) by launching the following URL:

Finally, you can also launch the Admin Console by clicking the link located on the ISY's

HTML Interface.

Once launched, you will again be asked to authenticate to your ISY. The default login

information is:

Username: admin

Password: admin

http://isy.universal-devices.com/994i/admin.jnlp