12.4 Generating a Network Topology Table
12.4.1
Adding Data
The table you can generate has some columns that you can add personal data to help you
better understand your setup. If your wanting to add to the table these entries (ie. Is Load,
Location, Notes) you have to enter them in the device properties.
• Log into your ISY.
• To get to each device properties go to the Main tab
• Expand the tree to your 'My Lighting'
• Right click on a device and select properties
• In this window you can add details to each device for the spreadsheet.
47
(Universal Devices)
Figure 205: Answer the Warning
Figure 206: Select Properties
47
Page | 351