Passing Values From Ifttt Event - Universal Devices ISY-994i User Manual

• The Method should be POST
• Click on Create Action. You are ready to test!

Passing values from IFTTT event

18.7.4
In addition, you can pass values from IFTTT events to a state variable or a dimmable
device. To do so, set your portal event with the action IFTTT Value. Then in the maker
channel, you can pass the value in the Body field. Just make sure to set the Content Type
to text/plain.
Using relative or absolute values
18.7.5
Values can be an absolute, or relative. To send a relative value, just precede the value with
a + or - .
• Examples (Device)
o Device values are always set as a percentage
o Use 0, to turn off the device
o Use +25, to increase the device level by 25%
• Examples (Variables)
o To increase a state variable by 10, just enter +10
o To set your state variable to 10, then just enter 10
Creating Outbound Triggers
18.7.6
You can use the Network Module to send outbound triggers to IFTTT.
Setup Instructions - IFTTT
18.7.7
• Go to https://ifttt.com and login
• Create a recipe
• In the THIS section, choose maker, and give it an Event Name (you will need this in
ISY)
• Complete your recipe with a THAT of your choice
Setup Instructions - Maker
18.7.8
• Go to https://ifttt.com/maker and login
• Take note of your maker channel IFTTT Key (you will need this in ISY)
Setup Instructions - ISY
18.7.9
• Go to Admin Console | Configuration | Networking | Network Resources tab
• Click on the Add button and give your resource a Name (you will need this in ISY
Programs)
Page | 488