Send Notification 'Provider; Run Program 'Node' Arg - Universal Devices ISY-994i User Manual

10.5.15 Send Notification 'provider'

Description: The 'Send Notification' command triggers the ISY to brodcast a notice via the
configured providers.
Category
Action
Sample Code:
Then
Send Notification

10.5.16 Run program 'node' arg

Description: The 'Run program' command causes the specified program to begin
execution. The target program's state will become True or False as the program's Then or
Else clause is executed. All normal conditions and restrictions apply; i.e. the target program
will begin execution regardless of the state of its Enabled checkbox, and the target program
will not begin execution if it resides within a folder tree any of whose folder's conditions
are false.
Run program 'node' (If) will cause the target program's conditions to be evaluated, and the
Then or Else clause to begin execution as the conditions are true or false. If the target
program has no conditions, its Then clause begins execution.
Run program 'node' (Then Path) will cause the target program's Then clause to begin
execution, regardless of its conditions.
Run program 'node' (Else Path) will cause the target program's Else clause to begin
execution, regardless of its conditions.
Category
Action
Arguments
To All
to All
Arguments
If, Then Path, Else Path, Stop, Enable,
Disable, Set To Run At Startup, Set To Not
Run At Startup
Page | 215