Fanlinc - Universal Devices ISY-994i User Manual

13.9 FanLinc

13.10 FanLinc & KeypadLinc Configuration
Setting up a Fanlinc(FL) and 6 button Keypadlinc(KPL) to control a fan
• Add the FL and KPL to your Network
• Remove any existing FL/KPL related scenes
• Select the KPL in the network tree
• Click Button Toggle Mode and make all buttons Non Toggle On
• Click Button Grouping
o Click Reset button
o 'Do not ever go back to Button Grouping dialog again. Ever!
• Create 4 Scenes Labeled
o Name the A button "High"
o Name the B button "Medium"
o Name the C button "Low"
o Name the D button "Off"
• Add the FL - motor device and all 4 KPL buttons to each scene as Follows
o Off Scene
▪ Set the OFF button as Controller
▪ Set all other buttons as Responders
▪ The FL - Motor will be automatically set as a Responder
o High Scene
▪ Set the High button as Controller
▪ Set all other buttons as Responders
▪ The FL - Motor will be automatically set as a Responder
o Medium Scene
▪ Set the Medium button as Controller
▪ Set all other buttons as Responders
▪ The FL - Motor will be automatically set as a Responder
o Low Scene
▪ Set the Low button as Controller
▪ Set all other buttons as Responders
▪ The FL - Motor will be automatically set as a Responder
• Configure the 4 scenes as follows
58 (Universal Devices)
58
Page | 364