Configuring A Upnp Router - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

21.3.1.1Configuring a UPnP Router

• Check the auto-configure Supported Remote Access Routers list, if not see On a Non-

UPnP Router below

• Make sure you have enabled UPnP within your router so the ISY can auto-configure

• In your ISY click on File --> Enable Internet Access to enable the ISY internet access.

This will negotiate the port through the router and out to the Internet

• Verify your ISY IP address in the popup window, it should NOT be from your local

network (a local IP would look like: 192.168.1.101)

o https://your.isp.add.ress - an example might be https://10.88.24.15

• Using the address assigned by your ISP or a domain name from a dynamic DNS

service you are now ready to access your ISY software from the Internet!

Figure 366: Enabling Internet Access

Figure 367: Enabled Access Message