Program: Mbfancheck - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

This program is the central location to change the length of the fan run time - in this case it

is set to 10 minutes

11.2.1.2Program: MBFanCheck

Main Bathroom Fan Check - Please take note of the comment that the program must be

Status 'BedAndbath / ~Devices / Main Bathroom Light SW' < 20%

Run Program 'MBFanSwOFF' (Then Path)

Run Program 'MBFanSwON' (Then Path)

Note that this program must be set to DISABLED. if it isn't it will shut down the fan

immediately when the light is turned off.

When called by the timer program, the status of the light is checked.

if the light is OFF the shut down program is called.

If the light is ON the timer program is called again.