Program Examples - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

attribute is intended to be used as a special flag for the ELK Rules. For example, you

may want a rule to trigger an output (magnetic door strike) when a certain user

code has been entered. If the Arm, Disarm, and the Access attributes are enabled,

then the first use of the user code will set the access flag. In this circumstance, an

additional pressing of the exit key or entry of the code is required to arm the system

▪ Reset power to both systems (ELK and ISY) including the M1XEP after changes

(especially #2) is made

▪ Make sure Globals -> Serial Port 0 Transmit Options boxes is checked? Typically all

but the Event Log need to be checked.

▪ Make sure ELK-RP is disconnected from the ELK-M1 control? If not, please

disconnect. The 3rd party commands will conflict with RP commands

6.11.3.7Program Examples

▪ Video: ELK Module Integration/Examples:

http://www.youtube.com/watch?v=8csU9qc7oo4&feature=youtu.be

▪ Trigger when the system is armed away AFTER the exit delay ends

The Elk system itself sends events Armed Away, Armed Fully, Armed with Exit Timer, and

Armed Fully in that order. We are uncertain as to why ELK sends the first Armed Fully. The

workaround is to put a 2 or 3 second wait at the start of your program e.g.

Elk Area 'Apt 1102' 'Arm Up State' is Armed Fully

And Elk Area 'Apt 1102' 'Armed State' is Armed Away

Wait 3 seconds

Send Notification to 'Default'

- No Actions - (To add one, press 'Action')