Add To Program - Universal Devices ISY-994i User Manual

Schedules and Conditions are placed in the If section of the program.
Actions are placed in the Then and Else sections.
Comments are noted at the bottom of the Program Details section.

9.2.4 Add to Program

This area facilitates the user in building the program. It simplifies the program building
process by providing the user a preformatted edit space filled in using Schedule, Condition
and Action buttons. It even provides you with a button to add comments in the program.
• IF – has the condition that must be met to for the program to run. This condition is
the trigger for the program to take action.
• THEN – is the primary action when the condition is met. The program here stays
running as long as the condition is met or True.
• ELSE – is the secondary action when the condition is no longer met or False and
only after the primary action was taken.
Your program is not limited to one condition and action. You can have multiple condition
and actions defined in the program. Multiple conditions are created using the And/Or pull
down menu field. Buttons labeled Add And (...) or Add Or (...) will be available only after a
second condition is added. The use of this button allows adding a parenthesis to your
program condition. An example of a program with multiple condition and action is shown
below.
22 (Universal Devices)
22
Page | 145