Control 'Node' Arg; Program 'Node' Arg; Node/Arg' Arg - Universal Devices ISY-994i User Manual

Sample Code:
If
Status
10.5.8

Control 'node' arg

Description: The control command checks for a current event of a node. It is watching for
a node to be activated by the user. It becomes true when the event matches the specified
condition. It has a small timeout window in which it makes sure that the event took place.
Category
Condition
Sample Code:
If
Control
10.5.9

Program 'node' arg

Description: The program command evaluates another program for its status.
Category
Condition
Sample Code:
If
Program
10.5.10 X-10 'node/arg' arg
Description: The X-10 command listens for X-10 events.
Category
Condition
'Family Room' is On
'Garage' is not switched Off
'Christmas Day' is True
Arguments
Is, Is Not, On, Off, Fast On, Fast Off, Fade Up,
Fade Down, Fade Stop
Arguments
Is, True, False
Arguments
Is, Is Not, Received, X-10 Commands
Page | 212