Link A Controlinc - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

• Remove existing links. This option adds the device to the ISY, and also removes any

existing links in the device. This is the default and the best option to choose if you

would like a clean start, or if it is a brand-new device.

• Add devices found in links and remove existing links. This option not only adds the

device, but also adds any devices that the device is linked to. Once complete, it removes

any links contained within the devices. This helps save some time if you have a device

you have already linked with other devices, but still clears out all links to give you a

fresh start.

• Add devices found in links and keep existing links. This option not only adds the

device, but also adds any devices that device is linked to. It also keeps any pre-existing

links between devices and builds ISY scenes out of those links. This is the best option to

choose if you'd like to preserve all existing links between devices.

5.2.2.2Link a ControLinc

Choose this menu to link a ControLinc.

• The Insteon address is on the back of the ControLinc, usually under the table-

Enter the Insteon address in the requester. Then click on the "Ok" button.

Note: You cannot discover or find other devices linked to the ControLinc using this option.

Figure 21: Linking Options