Program Status Dining Room China Cabinet (D3) - Universal Devices ISY-994i User Manual

14.1.3

Program Status Dining Room China Cabinet (D3)

If
(
X10 'D3/On (3)' is Received
Or X10 'D/All Lights On (5)' is Received
Or X10 'D/Bright (7)' is Received
)
And X10 'D3/Off (11)' is not Received
And X10 'D/All Lights Off (1)' is not Received
And X10 'D/All Units Off (13)' is not Received
Then
- No Actions - (To add one, press 'Action')
Else
- No Actions - (To add one, press 'Action')
Unfortunately, there is no such simple relationship for the Dim command. The Preset Dim
commands and scene commands are device specific, and experimentation will show which
are appropriate to monitor for a particular device.
Many X-10 relay devices (in-wall relay switch, appliance module, etc.) return to the former
state after a power failure, so if the X-10 device being tracked is such a device, an additional
program can be used to have the status program resume its pre-power-fail state as well:
Page | 394