Add X10 Device To Ezx10Rf; Advanced Options - Universal Devices ISY-994i User Manual

5.2.2.9Add X10 Device to EZX10RF

Figure 33: Add X10 Device to EZX10RF

5.2.2.10Advanced Options

Only available in firmware version 2.6.13+
This option adjusts the method used when the ISY is programming your devices. Please do
not use this option unless instructed by UDI support staff.
Smarthome has introduced a new protocol which uses extended messaging called i2. This is
intended to make communication faster and more reliable. Some devices introduced during
the changeover have both protocols enabled and can sometimes report as i2 although the
protocol is not fully implemented. Universal Devices has added, for firmware version
2.6.13, an option to select the original Insteon communication protocol, termed i1, in case
the Automatic option fails.
• This option should normally be left on Automatic which uses a query into the device
database to determine the best way of communicating.
Figure 34: Configure INSTEON Message Confirm
Page | 38