The Isy Administrative Console; Basic Configuration; Setting The User Id And Password - Universal Devices ISY-994i User Manual

In the future you may go directly to the ISY's Administrative Console by appending /admin
to the URL. For example:
http://192.168.0.101/admin

5 The ISY Administrative Console

The Administrative Console is divided into several tabs, each used to configure different
aspects of your ISY. This section provides information to help you take advantage of the
powerful features of the ISY Administrative Console.
The ISY's Administrative Console automatically checks for the latest firmware release.
When a new release is detected, the ISY provides a notification message and instructions on
how to perform the update. In some cases, however, you may want to manually download
and install a different firmware release. For example, some beta releases may contain
important features or device support that you may want to utilize. The Administrative
Console will not notify you of beta firmware releases. Please refer to 23.12 Manually
Upgrading Your Firmware for instructions on how to manually install a release.

5.1 Basic Configuration

Before getting started, it's important to configure a few basic items on the ISY.

5.1.1 Setting the User ID and Password

For security reasons, please change the default User ID and Password used to connect to
your ISY. Choose the Set Userid/Password option with the Administrative Console's File
pull-down menu as shown below.
Page | 17