Controlling Insteon Devices And Scenes - Universal Devices ISY-994i User Manual

NOTE: In order to delete a Device or Scene entirely from the node list, it must be located in
the parent "My Lighting" folder. So, to delete a node, be sure to move it out to "My Lighting"
first.
My Lighting. Clicking the My Lighting node on the left-hand pane displays a summary of
all your devices, their current states, their INSTEON addresses, their device types and their
firmware versions. You can sort by any field simply by clicking the appropriate column
header (Name, Current State, Address, or Type).

7.4 Controlling INSTEON Devices and Scenes

The Admin Console also allows you to control your INSTEON devices and scenes. Simply
click on a device or scene, and appropriate controls display on the bottom of the Console as
follows:
Figure 108: Scene Controls
On. Clicking this button turns the INSTEON device or scene on to its programmed On Level
using its programmed Ramp Rate.
Off. Clicking this button turns the INSTEON device or scene off using it's programmed
Ramp Rate.
Fast On. Clicking this button turns the INSTEON device or scene on to its maximum
(100%) level instantly (ignoring its programmed On Level and Ramp Rate).
Fast Off. Clicking this button turns the INSTEON device or scene off instantly (ignoring its
programmed Ramp Rate).
Brighten. Pressing and holding this button starts ramping up the brightness level of a
dimmable INSTEON device. Release the button to stop the ramp up.
Dim. Pressing and holding this button starts ramping down the brightness level of a
dimmable INSTEON device. Release the button to stop the ramp down.
LED Brightness. Some INSTEON devices allow you to adjust the brightness of their LEDs
by changing this value.
Some devices may have other controls or options available. To find out more information
for a particular device, please see 13 INSTEON Device Notes
Page | 109