The ELK Security Module changes that, fully integrating the ELK with the ISY allowing you
to use the ELK's available resources in your ISY programs.
6.11.1
The Basic Idea of this Module
This module is designed to expose ELK Security commands and events to ISY's
Programming environment.
Please note that since ISY uses the unsecure port for M1XEP, you must ensure that
your Wi-Fi network uses encryption
6.11.2
Requirements
• ELK M1 Gold (4) with firmware 4.6.4 or above
• ELK M1 Gold (5) with firmware 5.2.4 or above
• ELK M1XEP with firmware 1.3.28 or above
• ISY99/994 Series with firmware 3.1.13 or above
Figure 91: ISY Configuration
Page | 91