Keypadlinc Programs - Universal Devices ISY-994i User Manual

11.5 KeypadLinc Programs

11.5.1 Creating a KeypadLinc LED Follow Program
If you want to have a KeypadLinc button LED be lit whenever one or more devices is on in
the associated scene this is how you do it. And if you want to do it with more than one
KeypadLinc button you can create the same set of programs for each button the
KeypadLinc.
11.5.1.1KeypadLinc Button Toggle Mode
For this type of KeypadLinc LED follow setup the KeypadLinc will need the Button Toggle
Mode option set to "toggle" for each button that will be used.
11.5.1.2Scenes
This is the scene that we are going to use for this example that will be setup with the
KeypadLinc button. To keep it simple the
blue just as they are seen in the ISY Admin Console.
• Family Evening Scene
o Dining / Dining Hutch
o Family / Family Desk Spot
Family / Family Main (A) Evening
o
o Family / Family Main (load)
o Family / Family Screen
o Kitchen / Kitchen Island
o Kitchen / Kitchen Main
o Kitchen / Kitchen Main (slave)
o Kitchen / Kitchen Pantry
Kitchen / Kitchen Sink
o
We need to add the KeypadLinc button to a separate Scene as a
control the LED.
• Family Evening Scene LED
Family / Family Main (A) Evening
o
11.5.1.3Main Programs
These three programs are needed to complete the design. Program 1 is "watching" for the
button to be pressed on the KeypadLinc. Program 2a is to decide if the LED should be on or
off then set it accordingly. Program 2b is the Scene check that checks for any light being on
37 (Universal Devices)
37
controllers are in red
(KeypadLinc button)
(KeypadLinc button)
and the responders are in
responder so you can
Page | 282