Irlinc Receiver - Universal Devices ISY-994i User Manual

13.12

IRLinc Receiver

13.12.1 Add Button to IRLinc Receiver – 2411R
Note: The Scene Control buttons (A-H) are On/Bright, Off/Dim buttons and control only
one scene. Once either the On or Off button is linked to the ISY the other button is
automatically linked.
13.12.1.1Create Non-Toggle Links - (Always sends only on/off commands)
This can be handy if you want to create a button that is "All Off" or "Movie Time" (or other
situations where you want the button to do the same thing every time you press it). This is
also sometimes referred to as "non-toggle" mode.
• Select the "Add Button to IRLinc Receiver in the ISY Link Management pulldown
menu
• Press & hold the IRLinc Set button for about 5 seconds, then release
o Blue LED will turn Off
• Point your IR remote at IR Receiver, and press the button to be learned
o Blue LED will begin blinking
• Tap IRLinc Set button once (to always send an on), or twice (to always send an off)
o Blue LED will continue blinking
• On the ISY, click on Ok to link the learned button to ISY
o Blue LED will return to on as normal after ISY completes linking
61 (Universal Devices)
Figure 221: Add Button to IRLinc Receiver
61
Page | 371