Program #2 - Motion 2 – Enabled - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

11.8.1.2Program #2 - Motion 2 – Enabled

Control 'Main Bath Motion.1-Sensor' is switched On

And Control 'Main Bath Motion.1-Sensor' is not switched Off

Set 'Main Bath Lights' On

Wait 4 minutes

Set 'Main Bath Lights' Off

Here the Wait time occurs after the motion sensor has timed out and sent the Off command,

so if the motion sensor's timer is set to the default of one minute, then the total timeout

period of this program will be five minutes.

Another improvement is to separate the on portion and the timer portion of the program,

in order to allow having the INSTEON On command sent to the light switch only when the

light is currently off, thereby reducing INSTEON traffic by not sending redundant On

commands when the light is already on:

11.8.1.3Program #3 - Main Bath Motion On – Enabled

Control 'Main Bath Motion.1-Sensor' is switched On

And Status 'Main Bath Lights' is not On

Set Scene 'sMain Bath Lights' On

- No Actions - (To add one, press 'Action')

Troubleshooting