Remotelinc Faqs - Universal Devices ISY-994i User Manual

Home automation

Hide thumbs Also See for ISY-994i:

Table of Contents

When done linking communication mode can be quit by pressing the All Off button.

Buttons can be added to scenes the same as any other controller.

13.19.1.1RemoteLinc FAQs

If one of the numeric buttons is pressed to exit linking mode that button will no longer send

the On and/or Off commands.

A simple factory reset (without removing the RemoteLinc from the ISY) followed by a

Restore - ensuring that you press the All Off button to exit linking mode

A full recovery procedure would be to:

• Remove the RemoteLinc from the ISY.

• Factory reset the RemoteLinc.

• Re-link the RemoteLinc to the ISY - ensuring that you press the All Off button to exit

linking mode when done.

• Re-establish your button scenes.

13.19.2 Link a RemoteLinc2 – 2444A2

Firmware 3.1.17+

Choose this menu item to link a RemoteLinc2. Select the proper device from the sub-menu;

Switch, 4-Scene Keypad, or 8-Scene Keypad.

(Universal Devices)