Schedule - Universal Devices ISY-994i User Manual

Figure 130: New Program Screen
The enabled check box allows the system to run the program. Unchecking this box disables
the program.

9.2.4.1Schedule

The schedule button is used to enter time events into the IF section as a condition. When
selected the lower portion of the Add to Programs area changes its selection fields.
A check box for each day of the week and All (for all days) is available. This set the days of
the week the timer event will occur.
There are six pull down menu fields beneath the weekday checkbox. The first 5 fields
define the occurrence and the sixth field defines if the occurrence is based on Time,
Sunrise, Sunset or Last Run. Depending on the selection on the sixth field, the time set field
(fields 2 to 5) setting will change. Refer to Figure 133: Sunrise/Sunset field set and
Figure 134: Last Run field set.
A schedule can be set to occur at a specific or between the specified times. Selecting Time Is
(refer to Figure 131: Schedule Time Is condition fields) is for setting a specific time and
From/To (refer to Figure 132: Schedule From/To condition fields) is setting for
between specified times.
Page | 146