Additional Hardware Required; Figure 1- Upnp Configuration - Universal Devices ISY-26 User Manual

3.3.1 UPnP Configuration
UPnP is normally disabled on all computers by default. In order to make sure
and/or to configure UPnP, please follow the following steps (refer to Figure 1):
i. Click on My Network Places (either on the Start Menu or Desktop)
ii. On the left Navigation Pane
a. If you see "Hide icons for networked UPnP devices", you are done.
No further action is necessary
b. If you see "Show icons for networked UPnP devices", click on it
and let the system get configured. You are done.
Figure 1– UPnP Configuration
3.3.2 Java Installation
If you already have JRE 1.5v.6 installed, then no further action is necessary.
Otherwise, click on the jre/jdk-1_5_0_11-windows-i586-p.exe on the installation
CD to install JRE.

4. Additional Hardware Required

Please purchase and plug in the SmartHome PLM Version 4.6 in port A of the ISY.
- 7 -