Starting The Gui On A Host Computer; Figure 2- Network Neighborhood/My Network Places - Universal Devices ISY-26 User Manual

5. Starting the GUI on a Host Computer

If you already have Java installed and UPnP enabled, all you have to do is to click on the
icon My Lighting (refer to Figure 1) appearing in the My Network Places (refer to
Figure 2) either on the Start Menu or Desktop.
If the "My Lighting" icon did not show up on your My Network Places you will need to
follow the configuration steps below.
Configuration is comprised of three very easy steps:
iii. UPnP Configuration
iv. Java Installation
v. If you have any other network firewall software, please contact us to walk you
through the configuration.
Figure 2– Network neighborhood/My Network Places
In your Network Neighborhood/My Network Places double click on the My
Lighting icon, see Figure 1 – UPnP Configuration.
Once you double clicked the My Lighting icon in your Network neighborhood a
browser window will appear, See Figure 3 – Initial Browser.
- 8 -