Table of Contents
Advertisement
15.3.3 Replacing the TPM
Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– thin slotted screw driver (2 x 0.4 mm)
(
)
*
For Japan
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
V
CAUTION!
Advise your contact persons that they must provide you with all recovery
keys which belong to the system to restore them in the TPM later.
15.3.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 61
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
Ê Remove all expansion cards, see section
page
116.
I
Before removing the expansion cards, take a note on the installation
slot number for each card. Make sure that you reinstall the card in the
slot it was located before the replacement.
TX1310 M3
(
)
*
Upgrade and Maintenance Manual
System board and components
Hardware: 40 minutes
(
)
*
"Removing expansion cards" on
193
Advertisement
Table of Contents
